Wind Fences for Dust Control
Wind fences are porous barriers that slow the wind before it reaches open material. Less wind means less dust lifted and carried off site. They are widely used at stockpiles, mines, ports and industrial plants.
- Porous fabric screen
- Designed around your site’s wind
- Civil works coordination available
Wind Fences for Industrial Dust Control
Wind fences are engineered barriers that reduce wind speed around open areas such as stockpiles, material yards and industrial handling zones.
By lowering the wind at the source, they help keep loose material where it is, instead of letting it drift across the site and beyond the boundary.
Works best when
Dust gets worse in windy weather, the source is outdoors and in a fixed area, and there is space for a fence.
Pair it with other controls for
Crushers, transfer points, loading work and dry haul roads. A wind fence slows wind; it does not filter or collect dust.
The WindBarrier Wind Fence System
A wind fence is a complete system, not just fabric. The WindBarrier system combines a porous fabric screen with a structure and foundations suited to the site, so the fence stands up to wind load and daily site use.
You may also see wind fences called a wind barrier, windbreak or shelter fence. Whatever the name, no fence is truly windproof, so results depend on good design.
WindBarrier is the name used for this wind fence solution.
Fabric screen
Porous fabric wind fences with openness chosen for airflow, weather and dust build-up.
Support structure
Posts, cables and fixings sized for wind loads.
Foundations
Designed around soil, drainage and available space.
Gates and openings
Access for roads and conveyors without large gaps.
Where Dust Control Fencing Is Used
Fixed outdoor sources that face regular wind.
- Stockpiles and storage yardsCoal, ore, clinker, sand, aggregate and soil
- Mines and quarriesProduct piles, waste material and process areas
- Cement and aggregate plantsOpen storage of fine or dry material
- Ports and rail terminalsBulk-material yards near transport routes
- Power and industrial plantsFuel, ash and by-product storage
- Recycling and project sitesBiomass, waste and temporary stockpiles
What Decides Wind Fence Performance
Height alone does not decide results. These four site checks matter most.
-
Wind direction
Main and seasonal winds decide where the fence should stand.
-
Height and length
The fence must suit the pile height and extend far enough to limit wind around the ends.
-
Site layout
Buildings, roads and level changes affect airflow around the fence.
-
Future changes
If the pile grows or moves, the fence layout should be reviewed.
Common mistakes: choosing by height only, leaving large gaps, and ignoring later changes to the site.
Why Choose EKA Synergy Projects for Wind Fences
What you can expect when you work with us on wind fences for dust control.
-
Designed around your site
Fence height, length and position are based on your wind, material and layout, not a standard drawing.
-
Honest advice on fit
If a wind fence is not the right control for your dust source, we tell you and point to other options.
-
Fabric wind fence options
We review porous fabric systems, including the WindBarrier Wind Fence, against your wind and dust conditions.
-
One point of contact
The same team from first site review to handover.
One Team for Wind Fence Site Works
A wind fence needs sound ground, foundations and access. Eka Synergy Projects coordinates these site requirements within the agreed scope. Specialist wind analysis and structural design are confirmed in the final scope.
Wind Fence FAQs
Short answers to common buyer questions.
Does a wind fence stop all dust?
No. It mainly reduces dust moved by wind. Dust from crushers, transfer points, roads and vehicles needs direct controls such as covers, extraction, sprays or road treatment.
Can one fence protect against wind from every direction?
Not always. The sheltered area depends on the design wind direction, so sites with changing winds may need more than one fence section.
What is the WindBarrier system?
WindBarrier is a porous fabric wind fence system for outdoor dust control. It uses fabric panels on a supported structure. Ask our team whether it suits your site.
How is the fabric selected?
Selection depends on screen openness, wind loads, weather, dust build-up and maintenance needs.
Can gates and road openings be included?
Yes. Their size and position must be designed carefully, because large gaps reduce the sheltered area.
What maintenance is needed?
Inspect the fabric, tension, fixings, posts, gates and foundations regularly. Repair damage promptly, especially after severe weather.
Get a Wind Fence Quote for Your Site
Send us a few site details and our team will review your dust problem and suggest the next step.
- Site plan and photographs
- Dust source location and size
- Material and how it is handled
- Main and seasonal wind directions
- Area that needs protection